Haake rheostress 600 manual

• Thermo Scientific™ HAAKE distribution from 30 °C to °C; can be extended to °C with the premium, low temperature option. Universal active and passive upper temperature modules – Combine individually with the lower temperature module. manual. Ensure that this instruction manual is made readily available to every operator. Do not bend connection and/or mains cable, do not subject cables to stress or high temperatures (higher than 70 C). Check cables visually at regular intervals. The operator must have an uninterrupted view of the machine and its surroundings. The Thermo Scientific HAAKE RheoStress instrument is compatible with a whole range of sensor systems made from titanium for the rotating part and stainless steel for the stationary part. Aluminium is used for the disposable systems. For high temperature applications the geometries are equipped with a ceramic shaft to prevent excessive heat www.doorway.rug: manual.

available for the HAAKE RheoStress All temperature control units from previous HAAKE RheoStress models (, , , ,..) can still be used. Temperature Control Units Overview of Temperature Control Units Temp. min. °C Temp. max. °C Heating rate K/min Cooling rate K/min Liquid temperature-controlled cylinder unit* 2* 1*. HAAKE™ MARS™ Rheometer Platform on the following factors: • Future-orientation • Accuracy • Ease of use • Modularity • Application-based solutions Bring the flexibility of the HAAKE MARS platform to your lab and see how quickly you can respond to changing testing requirements of today’s new materials. The enhanced modularity expands. manual. Ensure that this instruction manual is made readily available to every operator. Do not bend connection and/or mains cable, do not subject cables to stress or high temperatures (higher than 70 C). Check cables visually at regular intervals. The operator must have an uninterrupted view of the machine and its surroundings.

The Thermo Scientific HAAKE RheoStress Rheometer and HAAKE MARS II Rheometer are out of service. If you have one, consider an upgrade to MARS 40/ Rheological properties of the emulsions were obtained with a rotational Haake Rheostress rheometer and a cone and plate geometry sensor (60mm diameter. The display/control unit of the HAAKE RheoStress is used for manual operation of the lift and the gap setting. It is also used to set preselected shear.